Controller Parallel Port Pad 1 Pad 2 Pad 3 Pad 4 Pad 5 1 (Dat) 10 11 12 13 15 2 (Cmd) 2 3 (+7v) +7.6v 4 (Gnd) 18 5 (+3v) +3.5v 6 (Sel) 3 7 (Clk) 4 8 - 9 (Ack) -

Notes

• The pin numbering for the PSX connector presented here is reversed from the numbering in the linux joystick-parport.txt document.
• The original linux interface does not include +7v required for force feedback operation. The interface wil function properly without the +7v supply but no force feedback will be possible.
• See the Powering PSX pads page for details on how to provide the +3.5v and +7.6v required by the PSX pads.
• This interface is the same as the PSX interface for SNESkey
• General notes about interface construction
• This interface supports configurable timing parameters - see Changing timing parameters on how to change these values and Playstation timing parameters for their meanings.
• PPJoy has a debug mode for playstation interfaces. See Setting PPJoy global options for a description of this feature and how to active it.

Credits